1. The original solid wood door uses the same kind of wood from both the door leaf and the door cover. The selection of this kind of wood door is very particular, involving the origin and grade of wood, which is the decisive factor for the price and quality of the wooden door. For example, the market is also rosewood, there are Hainan, Vietnam, Myanmar, Brazil rosewood. The price difference between different materials is nearly 20 times. Secondly, the difference in the production process also makes the value of the wooden door very different. Experts said: %26ldquo; different employment, the cost can reach 1:8, such as the carving of the original wood door carving and hand carving, the most carved door on the market is machine carving local flower board, the lace is carved with small scraps Then use glue and nails to install. This kind of carved door, the carving process looks neither fine nor rigid, and the time will be loose. And a decent set of hand-carved doors, good carving, long life, the price is bound to be high. Therefore, consumers must understand these basic common sense when choosing a wooden door.
2, solid wood craft door is the use of shirt wood as the base layer, the original wood veneer as the surface of the craft door. Most of the products currently used in the market are solid wood craft doors.
In recent years, wooden doors have basically bid farewell to hand-made, gradually moving toward industrialization and standardization, and the choice of production technology, mechanical equipment used, and raw materials are very different. For example, many manufacturers choose to use multi-layer boards as the base layer, using domestic 20-30 silk veneer for manual veneering, thickness of 2-3 cm, door leaf using shirt wood as the base layer, MDF surface sticking domestic 20-30 The silk veneer is processed by veneer, the door and the door cover are not solid wood edge sealing, and the paint is made of ordinary materials. The general market price is 1300-1800 yuan / set. Such wooden doors will produce wood shrinkage after a period of time, forming obvious dents. The solid wood craft door produced by the regular brand wooden door manufacturer, after using the imported materials to be cooked in the drying room, is dried in about 20-30 days, and it still has to pass 4% 26mdash; it can be completely shaped after 5 months. The wooden door thus produced should not be deformed. The door cover adopts the finalized shirt wood as the base layer, the sides are sealed with 5 mm logs, and the side is covered with high-density board with 50-60 wire imported veneer mechanical hot pressing veneer. The thickness of the door cover is about 4-5 cm. The door opening does not need to be grounded. The door leaf uses the shaped shirt wood as the base layer without any filler. The surface is covered with 50-60 filaments of imported veneer with a high-density board and surrounded by 5 mm thick logs. The characteristics of this kind of wooden door are natural and clear, and the surface can be polished. After the white embryo is finished and sent to the paint shop, the whole treatment is carried out first, then the PU primer is brushed by hand, polished, oiled and polished, and processed many times. (A total of 5 times of primer, 3 times of topcoat) and use NC color finish to repair the product. In order to make the surface smoothness of the product natural and realistic, use NC four-point bright finish (114001K), and use NC banana water (901002B), anti-white water (909007), slow-drying water (909011) to achieve the bottom layer modification and protection. To make the product more perfect. This wooden door is pollution-free, green and environmentally friendly, and is the choice for medium and high-end decoration.
Document.body.oncopy = function () { setTimeout( function () { var text = clipboardData.getData("text"); if (text) { text = text + " This article comes from China Wooden Door Network, China's well-known wooden door industry portal Website! (http://) Detailed reference: "+location.href; clipboardData.setData("text", text); } }, 100) }Light Proof Material PET Film
Color :1.silver/silver 2.silver/white 3.silver/black 4. white 5. black
Raw materials: Metallized Pet White Film, Metallized Pet Black Film, opaque PET White Film , opaque PET Black Film , both sides Metallized Pet Film
Light transmittance: 0% , 8%, 11%,13% , 19% ect
Application :Avoid light materials
Metallized Black Pet Film,Pet Metallized Black Film,Silver And Black Pet Film,Opaque Matte Black Pet Film
Shijiazhuang dadao Packaging materials Co , https://www.ddplasticfilm.com