However, with the increasing demand for sofas in the market, some companies have cut corners in the production of sofas, shoddy and shoddy, and hit the market with low prices. As a result, the quality of sofas is worrying, and consumers’ quality complaints are also Stay high. And if consumers really want to defend their rights, they will spend a lot of energy and money. Today, Xiaobian is here to solve the problem at hand. If the sofa product has the following quality problems, then you can fix it yourself.
1. The sofa seat is wrinkled and sunken.
1. The main reasons for the wrinkling and sagging of the sofa seat are: sponge subsidence; spring deformation, shedding; wooden square fracture; uneven force applied; generally less deformation of the sponge, spring shedding, wood fracture more.
2. Require the shopping guide to consciously guide the customer to make the sofa evenly stressed when using the sofa when introducing the product to the customer or placing the order, and the sofa should not be partially stressed for a long time.
3. If the leather of the sitting surface is wrinkled, as long as the sofa bottom cloth is taken apart, the handle of the sitting side is tight.
4. If it is a depression, first find out the cause of the problem. If the bag spring is deformed, the deformed bag spring will be restored or replaced. If the snake spring falls off, the fallen snake spring can be restored and strengthened; if it is wood When the square breaks, the broken wood is first restored, and a wooden square nail is added.
2, sofa screen and handrail pressure deformation.
1. The main reason for the deformation of the sofa is that it is not stored as required during storage; the long-distance transportation of the fashion car is unreasonable, the heavy product is placed on the sofa, and the deformation is caused by heavy objects for a long time; the improper use of the customer.
2. The sofa should be laid flat during storage or layerd with iron frame, which saves the space and avoids deformation of the sofa; when the sofa is in the loading and unloading, the sofa should be placed on other products, and it should not be piled too high. In this way, in the long-distance transportation, the deformation of the sofa can be reduced; the customer can not sit on the armrest of the sofa or press hard on the backrest to avoid causing deformation of the sofa.
3. Maintenance method of sofa screen deformation: The screen deformation of the sofa is generally a screen package, first understand the installation structure of the sofa, the armrest is disassembled, first remove the armrest, then remove the screen bag, put The deformed area is flattened with a sponge or a cotton spray pad, so that the flat place is the same as the feel of other places, and then the bag is loaded and smashed up in the order of removal.
4 hair arm deformation deformation maintenance method: mainly the armrest package sofa is prone to deformation, first distinguish the structure of the sofa, the armrest is disassembled, the armrest is removed directly. If it is not disassembled, it can be removed by sitting or screen together. After disassembling, the deformed place can be padded under the sponge or cotton spray to ensure that the feel of the pad is good. After the pad is full, the bag is loaded.
5 Disassembly and assembly precautions: first remove the solid wood feet with electric drill, then remove the base fabric with a screwdriver, remove the bottom cloth should be careful not to break the base fabric, see the structure of the screen frame, how many screws are there, Self-tapping screws are installed. If there are self-tapping screws, loosen the self-tapping screws with electric drills, first remove the screws on the side of the screen with a wrench, and then remove the bottom screws. The disassembly and disassembly of the sofa is the same as the method of disassembling the screen; the armrest and the screen are not disassembled and the sofa should be noted. First, after removing the solid wood foot and the base fabric, the handle cloth of each part of the sofa can be seen. Then use a screwdriver to remove the handle cloth of each part (be careful not to break the handle cloth when disassembling), level the deformed area, and then press it in the order of removal.
3, the sofa is not installed firmly, loose
1. The main reason for the looseness of the sofa is that the screw is not tight enough when the sofa is installed, which causes the sofa to be loose for a period of time; or the hole of the sofa is too large, causing the screw to be screwed down, causing looseness; Or the sofa is loosened due to heavy objects being squeezed or bumped during transportation.
2 If the screw is not tightened, tighten the screw or use a self-tapping screw.
3 If the hole is too large to cause looseness, first loosen the screw that has been trapped, use a nine-pronged plywood or a wooden drill to make a small hole, place it on the depressed hole, and then tighten the screw with a washer.
4. The sofa sits up and makes a sound.
1. There are two main reasons for the sofa to sit up and sound: First, the sofa wooden frame is loose and firm; Second, the snake spring sitting on the bottom of the sofa and the wooden frame will make a sound of friction; Third, the friction between the leathers makes a sound.
2. The wooden frame is loose and there is a sound to first distinguish the place where the sound is heard. If the wooden frame is loose and the sound is not strong, look at the sound of the sound, add nails and add wood to the sound.
3. The sound of the friction between the bottom of the snake spring and the wooden side can be pulled apart, or the snake spring in the place where the friction occurs can be pulled off, or the wooden side can be cut off with a knife until it is seated without sound.
4. The leather rubs against each other and can be applied to the friction with a leather protector to make the leather soft and smooth, so that there will be no friction.
5, the middle of the four-person sofa is uneven, not close together.
1. The four-person sofa and the five-person sofa are composed of two sofas. The main reason for the unevenness is that the sofa is crushed and deformed by heavy objects during the storage and transportation process, resulting in inconsistencies in the combination of the two sofas.
2. If the deformation is not too serious, you can combine the sofas first, and then slap the deformed places to the same height. After being squeezed by the combination of the two sofas, the sponge inside will slowly recover.
3. If the deformation is too serious, remove the deformed screen, flatten the deformed area, and then smash it up, and combine the heights.
4. If it is not close together, inconsistent, it is likely that the wooden side, the splint is broken. First, the broken splint is restored and nailed, and then the wooden or plywood nails are firmly fixed at the break.
6, the sofa solid wood parts loose, fall off.
1. The solid wood furniture is loose. Some are solid wood pieces that are too long and too large. When the sponge is installed, it is afraid to screw the interface of the solid wood parts, so sometimes it is not tightened too tightly. After a period of use by the customer, there is looseness; the other part is in transit. Forced to cause looseness.
2. The solid wood feet of the sofa fall off, mainly because the wood is too small to install the solid wood feet, or the wooden side bursts during installation.
3. If the solid wood piece is loose, just tighten the loose place. If the solid wood falls off, add the wooden side to the place where the foot is placed, and then install it.
All of the above are problems that need to be repaired by tools. The tools required are: air pump, air gun, spray gun, electric drill, screwdriver, wrench and supporting repair materials.
Of course, these methods may still be difficult for individuals, but I believe this article should be useful for users who are repairing sofas.
For more information on the Chinese furniture industry, please pay attention to the official website of Xianghe Furniture City ().
Coil Straightener Feeder with compact design are preferred to be used in case of only small available space as well as in case of less delicate coil material with big material square. They normally are used at middle-sized feeding lengths and middle-sized number of press strokes per minute.
Coil Straightener Feederare composed of a Decoiler Straightener unit and NC Servo Feeder unit and are particular suitable for profiling, Metal stamping press line, roll forming line, laser cutting, shear and many other machining processes.
By combination of straightener and roll feed into one machine, so called feeder-straightener, which is positioned directly at the press, the needed space for a (very often long) material loop of straightened material can be saved..
The feeder-straightener is supplied with material out of a (in comparison) very small loop of not straightened material below the Decoiler.
Coil Straightener Feeder is suitable for automotive industry, automobile stamping, appliances manufacturing, computer and electronic components, hardware and metal parts/Metal Fabrication/Precision Metal Stamping industry etc industry. Such as Bracket, Damper, brake Pad, Tie Bar, Electric Accessory, Shell Parts Of Printers, Computer Frame,Slide Rail of Car Seat, Splash Shield of car body and etc.
Press Room Automation, Coil Straightener Feeder,NC Leveler Feeder, Unwinding Leveling Feeding
Mayflay Machinery(huizhou) Co.,LTD , https://www.pressfeeders.com