The principle of the high-pressure washing machine uses the power device to make the high-pressure plunger pump produce high-pressure water to wash the surface of the object. The impact force of the water is greater than the adhesion between the dirt and the surface of the object. . The purpose of the high-pressure cleaner is to wash various motor vehicles, equipment, building exterior walls, floors, baths, swimming pools, etc. Development trends and market analysis of high-pressure cleaners At present, high-pressure cleaners have a broad market, and the annual demand in the international market is 40 million units, and the market demand is increasing. Industrial design of high pressure washer involves many disciplines, internal combustion engines, compressors, valves, fluid mechanics, injection technology, sealing technology, surface engineering, new materials, corrosion and protection. In the domestic market, the high-pressure cleaner market is still in the early stages of market development. The use of high-pressure cleaners is not widespread, but with the improvement of people's living standards, especially the gradual popularization of cars and the gradual improvement of people's living environment, And the increase in our personnel exchanges with developed countries, the impact of foreign lifestyles on us is also increasing, the domestic high-pressure cleaner market is also rapidly expanding, and market demand is rapidly increasing.
High temperature and pressure washer
With the continuous improvement of China's car ownership, the auto beauty industry has developed rapidly. As the main project of car beauty, car cleaning has put higher and higher requirements on cleaning equipment. The high-pressure cold water washing machine can be used for cleaning the outside of the vehicle, while the high-temperature high-pressure washing machine for oily engines and other parts is better. The high-temperature and high-pressure washing machine is mainly based on imported equipment, with high water outlet pressure, high temperature and good cleaning effect. However, the cleaning equipment has a complicated structure, inconvenient maintenance, and high cost of accessories. In order to reduce the equipment failure rate and extend the service life, it must be used correctly and maintained.
Working principle: The maximum pressure of the high-temperature and high-pressure washing machine is 130 bar, and the maximum temperature is 90 degrees Celsius. In order to achieve the high temperature and high pressure of the outlet water, the washing machine first presses the tap water (inlet pressure is not less than 1 bar) with a three-phase motor to drive the column race pump to high pressure after three stages, and then it is heated by a fuel (diesel) heater. It is ejected by a high-pressure spray gun.
Steel Handle,Cabinet Pulls,14Mm Stainless Cabinet Pull,Steel Handle Knob Pulls
JOKER UNO LIMITED , https://www.jokeruno.com