Whole home customization and oneself, please do one of the woodworking: time comparison
Choose overall home customization:
1. Shop around. Understand the incorporation of the plates, the manufacturing process, the hardware preparation and the professional design of the intended brand, as well as the final preparation price for comparison;
2. Choose the company that you think is satisfactory. (According to the progress of the decoration, you can make an appointment at the company's designer to measure the size at any time);
3, to the company to see the design drawings and appropriate changes as needed, until they meet their own requirements. (Designer door-to-door size);
4, confirm the drawings and budget and choose the color of the board, hardware handles and sliding doors and other contracts; from the production of the order to the completion of the installation, it takes only more than 20 days to easily solve the most time-consuming part of the renovation. !
Choose yourself and ask the workers to do at home:
1. Take time to look at other people's renovated cabinets (requires time and effort!)
2, no professional wardrobe designer design, after reading the need to yourself or let the woodworker to design and ponder their own cabinet. (The final effect can't be felt, and you need to be personally involved! Time and energy!)
3, the workers master open materials (work hard everywhere to compare the purchase of the first material)
4, the master started working for a few days to start making up the first material (in the end, make up enough to use only to see the master)
5, the cabinet needs to start to buy the line soon (usually there is no way to buy in place once, to run several times only to see the master)
6, the final purchase of hardware materials (the end of the carpentry, there may be a lot of unsatisfactory places in the acceptance, began to choose the paint master ... began to buy paint everywhere ... · to the end of the cabinet) (in this part of a lot of time and energy not to say There are still a lot of owners' reactions that are lingering and not environmentally friendly, not to mention the unsatisfactory processing skills of the workers' masters. It is really miserable.)
The above comparison is based on the collection and finishing of the owner's feelings and feelings.
Overall home customization and self-industry, please do the second: price comparison
Choose the whole home customization: all the preparation prices you determine when placing the order, as long as the drawings are determined once, you can get your total amount, you will not spend a penny! Really, the price is clear!
Choose to do it yourself: plate (quite part of the pity of leftovers) + mouldings + paint + woodworker money + painter's money + hardware materials + time you buy back and forth, supervise the work + your repeated rounds of fuel / fare = total Amount (I don't know if anyone who thinks that the overall home customization is expensive has calculated this account)
The overall home customization and self-requested woodworking three: beautiful contrast
Overall home customization: the surface of the board is very flat, and the edges are smooth. Every link has modern woodworking machinery and equipment. Please do it at home: the surface of the board is very uneven, the hand paint is lacking in balance and leveling, and the side strips are all done by hand. The process is much rougher than a fully automatic machine seal.
Overall home customization and self-requested woodworking four: environmental comparison
Overall home customization: high environmental performance of the sheet substrate itself + double sided veneer (no paint) + four sides of the board full edge = small formaldehyde release (E1 level)
Please ask the workers at home: sandwich panels (most of the panels selected by the owners, low procurement costs) is the use of a large number of rubber pressure synthesis + sheet single veneer + surface brush paint, etc. = excessive release of benzene and formaldehyde. It is environmentally friendly with the use of fir boards (selected by some owners, the procurement cost is high), but its shortcomings are rough, not fashionable and beautiful. Most young people are difficult to accept. They prefer to use fashion, environmentally friendly and cost-effective overall home. . Some people use the fir board to finish the cabinet to paint or varnish. This choice is healthy and environmentally friendly for the sake of beauty. The original is upside down! Because the paint and varnish need a long time to ventilate harmful objects under the ventilating conditions. Finish.
BridesmaidChina xxx,xxx,xxx,This is a very unique design,paracord bracelet with pearl clasp,and clasp is made with teardrop baroque pearls,which is very suitable for the bride's wedding.China xxx,xxx,xxx,This is a very unique design,paracord bracelet with pearl clasp,and clasp is made with teardrop baroque pearls,which is very suitable for the bride's wedding.China xxx,xxx,xxx,This is a very unique design,paracord bracelet with pearl clasp,and clasp is made with teardrop baroque pearls,which is very suitable for the bride's wedding.China xxx,xxx,xxx,This is a very unique design,paracord bracelet with pearl clasp,and clasp is made with teardrop baroque pearls,which is very suitable for the bride's wedding.
Bridesmaid Dress,Lace Bridesmaid Dresses,Formal Bridesmaid Dresses,Formal Red Bridesmaid Dress
Bossgoo Information Technology Co., Ltd , https://www.bossgoodemo.com