Introduction of new concept steam boiler

Control System:

Intelligent type of microcomputer: Siemens PLC programmable controller + imported (OMRON) frequency converter. Its features are: programmatic control of equipment operation, which can be programmed according to the user, automatic load tracking by frequency conversion device, adjustment of operating pressure, load, etc., good safety performance; and can be connected with building automation to achieve unattended operation.

Safety prevention system:

1. The structural design of the steam generator body itself is the root of safety and reliability. The heating surface adopts the coil type, which has good thermal compensation; the thermal expansion and contraction of the coil causes the peeling of scales in the tube and has a self-cleaning effect; the coil is Single-channel mode, no circulation dead angle, to ensure reliable operation and long life; the steam generator has extremely small water capacity, little heat storage, and no explosion risk.

2. The device itself has multiple safety protection devices: there are overpressure secondary fire and overpressure primary fire protection; then overpressure power failure protection and alarm; feed water flow too low protection; steam too high protection and alarm; overpressure safety valve Take off; explosion-proof door of flue, etc.

Economic savings:

There is no need to build a boiler room separately, and the installation location is unlimited, saving the construction cost of the boiler room.

It is about 2/3 lighter than the three-pass wet-back boiler.

It saves energy by about 30% compared to the three-pass wet-back boiler.

Our company's products are free from explosion hazards, (pot boilers have explosion hazards).

Soot and scale are self-cleaning.

The requirements for water quality are not high.

Because the technical content and manufacturing cost of this boiler is relatively higher than that of the three-pass boiler, the initial investment is relatively higher, but in comparison, the later operating costs (such as a 2 ton boiler) can save more than 100,000 yuan per year. The investment can be recovered within two to three years. For the user, the really big cost is the late operating cost, not in the early stage. As long as the user has a good choice of boiler, the early stage investment can be recovered quickly.

This boiler was awarded the national utility model patent in 2004. The name of the utility model is: automatic contaminated spring structure conical heat exchange surface steam generator