First, the preparation before the device
Before the solid wood composite door device, it is necessary to open the package inspection at the store, and carefully check the quantity, style, color, scale and appearance of the goods with the quality problems detectable by the naked eye. If in doubt, it is necessary to process the device first.
1. The door leaf and door frame should be stacked indoors with a pad, and the frame should be separated from the door leaf. Stop the storage with acid and alkali, and the room should be cleaned, boring and ventilated.
2. Store in a room without a shelf and separate from the heat source to avoid deformation by heat.
3. Check the site conditions, organize and clean the work area, and check whether the reserved dimensions of the door or door frame meet the requirements.
4. Recognize the scale of the device and count all goods and accessories.
5, prepare the device, together with the door leaf, door frame and hardware accessories, door locks, hinge glass, etc. of the device to be separated and put away, but do not need to unpack all the main and accessories outer packaging, avoiding Form damage and confusion.
Second, the door cover device:
1. The joint of the door cover device of the solid wood composite door should be tight, flat and without black seam; the fixed parts should be locked; the diagonal of the door cover should be accurate, within 2 meters, the public service should be ≤ 1 mm, and the promise of 2 meters or more should be ≤ 1.5 mm;
2. The gap between the door frame and the wall is stopped by cement, preferably filled with styrofoam, followed by wood.
3. After the door frame and the touch device on the ground, it is necessary to use the anti-mold to build the filler (with various colors) to fill the cover along the perimeter of the door frame.
Third, the line device:
1. The threading device should be evenly coated with the door cover and the wall. The socket interface should be flat, tight and seamless. After the device, the same side sleeve is in a plane. If the wall is not flat, it is necessary to ensure the thread. The interface is flat. The set line curvature is 1 mm for the public service. The gap between the line and the wall is sealed with a sealant.
Fourth, the door fan device:
1. After the door fan device, it should be flat and vertical, and the door leaf and the door cover should be flat; the door leaf is open without abnormal noise, and the opening and closing are sensitive;
2, the gap between the door cover and the door leaf, the lower seam is 6 mm, the other three sides are 3-4 mm; all the gaps promised to be plus or minus 0.5 mm;
3. After the door is closed, the seal is tightly connected and does not swing.
Stackable Shoe Box,Plastic Shoe Box,Transparent Storage Box,Dust Proof Shoe Box
Taizhou Baiying Commdity Co., Ltd , https://www.baiyingplastics.com