Generally speaking, in the case where the flexo printing unit is sufficient, the same color of the screen and the solid version should be divided into two, because the screen printing requires a thinner ink layer, while the field and line versions need to be thicker. The ink layer. However, in some special cases, it is necessary to make the same color of the network cable and the field image to the same version. In this case, in the printing, the choice of anilox roller should be compromised, usually to meet the printing requirements of the screen version, and at the expense of the thickness of the ink layer, this article will introduce you to the wide-format flexo press.
Flexo printing has a long history in our country, but in the process of use, there will still be a lack of use, so when choosing a flexo model, it should be judged according to the actual situation.
According to the type of printed matter, the quality of the printing machine selects the model of the flexo printing machine. If a certain kind of printed matter can choose a variety of flexographic printing machines, it should analyze the performance and cost performance of different models, and choose the most flexible. The printer's special features and functional models, even for similar flexo presses, will vary in detail when printing different prints. These factors should be taken into account when selecting the flexo press model.
According to the type of printing machine selected flexo printing machine, it can be divided into two types: sheetfed and web. The type of flexo printing machine for sheetfed is generally used for printing products with large variety and small output. The printer model is generally used in the case of large batch size and low production variety. The web flexo press models are divided into three categories: cascading flexo press models, satellite flexo press models, and unit flexo press models. These flexo press models are different and suitable for printing. The materials are also different and should be distinguished.
Since the flexographic material is soft and compressible, the pressure between the printing plate and the anilox roller on the printing unit and between the printing plate and the surface of the printing material needs to be finely adjusted. The adjustment knobs are usually made with very thin threads and require four directions of adjustment independent of each other. After fine adjustment, the best condition achieved should be maintained throughout the printing process.
Article source address: http://
backpack blower is a kind of light, flexible, high efficiency environmental protection tool. This machine is suitable for highway blowing dust and blowing snow, blowing snow thickness up to 15 cm, blowing sand on the railway, Lai big gate film and blowing snow on the transformer in the open air (when blowing snow on the transformer in the open air, need to be equipped with 2.8 meters of telescopic Air Blower). Blowing leaves in the park, blowing snow in the yard and forest fire prevention, etc. The advantages of this machine are small size, light weight, oil saving, easy to start, big wind and so on.
Backpack Air Blower,Petrol Backpack Leaf Blower,Commercial Backpack Leaf Blower,Industrial Backpack Leaf Blower
Shaoxing Haotuo Machinery CO., LTD. , https://www.haotuochinatools.com