After printing, the printing should be done. If the temperature of the developer in the plate processor is too low, the processing speed of the plate processor is too fast, the development time will be shortened, the development will be insufficient, and the printing plate will not be cleaned. If the concentration of the developer is insufficient, the time for replenishing the developer is adjusted too long, and the printing plate will be insufficiently developed.
The method to eliminate the above failure is to check the temperature and development time of the developer, and adjust to reasonable data. When using the developer, the manufacturer will provide the ratio of the formula, which should be done according to the ratio. But sometimes it can be more concentrated. The plate processor should be repaired in time, replace the rubber roller, and regularly clean the crystals in the tank and on the wall of the tube.
The specific method is: use oxalic acid to circulate the water in the processor and effectively remove the dirt. At the same time, the brush roller on the machine should also be cleaned and replaced if necessary. In addition, in the process of decontamination, the operation is not careful, the amount of decontamination solution is insufficient, the use time is short, the decontamination note is invalid, and the dryness of the decontamination solution on the plate surface may cause the plate to be dirty.
During the gluing process, low concentration glue is used, and oxidation of non-graphic parts will cause the printing plate to become dirty. The solution to this kind of problem is: after decontamination, the cover should be tightly closed; after the plate is decontaminated, it should be fully washed, the glue concentration should be increased when glue is applied, and the glue injection should be uniform; After printing.
Our Tension Fabric Display is 240g and 280g stretch fabric with dye sublimation printing plus strong aluminum frame. It is very easy to assemble and store. LED lights on the top of the display stand is available. We have different shape of our tension fabric displays ,such as curved fabric tension displays , straight fabric tension display ,pop up tension fabric displays , oval tension fabric counter ,tension fabric hanging banners. Custom size and shape is acceptable.
Suitable for exhibitions, events, conferences, showrooms and retail. The most important is that the cost is very economical , you just need to buy the aluminum frame one time , and easy to change the graphic banner for your next trade show ,events .ect. Double sides printing is available .So this means you can use the banner twice. and show the different graphic on double sides on the same time .
FAQ:
1. what is the difference between graphic only, or graphic included option?
--- Graphic only is for old customer to replace graphic printed banner .Graphic included means printed banner add aluminum frame.
2. do you provide design service ?
--- Yes ,we have template for desig.
Tension Fabric Displays,Fabric Pop Up Display,Pop Up Display,Fabric Display
Golden Mouth Advertising (H.K)Co.,Ltd. ( Jie Da Advertisement Co.,Ltd) , https://www.advertisingflagbanners.com